Before You Fill And Apply Your Pod - Insulet Omnipod GO User Manual

2 Applying or Removing a Pod

2.3. Before You Fill and Apply Your Pod

1. Gather the necessary supplies:
• A bottle of rapid-acting U-100 insulin cleared for use in the
Omnipod GO Pod. See "1.6. Compatible Insulins" on page
6 for a list of the insulin types that can be used with the
Omnipod GO Pod.
• An unopened Omnipod GO Pod prescribed to you
• Alcohol prep swabs
2. Wash your hands before starting . Keep them clean throughout
the Pod change process.
3. Check the insulin for signs of deterioration according to the
manufacturer's instructions for use.
4. Check the Pod's packaging for damage. If undamaged, open it and
inspect the Pod for signs of damage.
5. If the insulin or Pod is below 50°F (10°C), allow it to warm up to
room temperature before proceeding.
6. Confirm that you are using the correct Omnipod GO Pod
prescribed to you. Look for the prescribed daily insulin rate
on the package.
7. Select your Pod site, the spot where you plan to apply this Pod on
your body.
24