Zoom Operation; Manual Operation - FujiFilm FUJINON XK6x20 SAF Operation Manual

ZOOM SEESAW
CONTROL LEVER
ZOOM LEVER
CONNECTOR FOR
ZOOM CONTROL
ZOOM SERVO/MANUAL
SELECT KNOB
The zoom can be operated in the following four operation modes.
(1) Manual Operation................................................................................................................................................ E-8
(2) Operation by Zoom Seesaw Control Lever.............................................................................................. E-9
(3) QuikZoom Operation ......................................................................................................................................... E-9
(4) Auto Cruising Zoom Operation ...................................................................................................................E-10
For the operating instruction in each mode, refer to the description on each mode.
The remote control operation is also available with optional accessories.

(1) Manual Operation

a. Set the zoom servo/manual select knob to "M."
b. Rotate the zoom ring directly or using the zoom lever. Clockwise rotation of the zoom ring, viewed from
the camera side, moves the zoom to the wide side, and counterclockwise rotation to the tele side.
(When rotating the zoom ring directry, it is recommended to remove the zoom lever for smooth
operation.)

ZOOM OPERATION

- E8 -
ZOOM RING
Page