Iris Operation - FujiFilm FUJINON XK6x20 SAF Operation Manual

IRIS MODE SELECT SWITCH
IRIS MOMENTARY SWITCH
There are two iris operation modes: auto iris mode and manual mode.
For the operating instruction in each mode, refer to the description on each mode.
Note. The auto iris mode only operates if the camera supports this mode. (The auto iris mode may not function
normally due to the compatibility with the camera. In that case, use the manual mode.)
■ AUTO IRIS MODE
Set the iris mode select switch to "A." The iris of the lens will automatically be adjusted responding to the object
brightness.
■ MANUAL MODE
a. Set the iris mode select switch to "M."
b. Rotate the iris ring by hand to adjust the iris. Clockwise rotation of the ring causes the iris to move toward
the closed side and counterclockwise rotation toward the open side.
Note 1. Although the iris operation mode is in Manual, the iris is adjusted automatically while the iris momentary
switch is being pressed.
Note 2. The positions of the auto iris mode and the manual mode in the iris mode select switch can be interchanged
by setting the iris A-M position change switch (refer to page E13) to ON.
When the positions are interchanged, apply the mode indication label, enclosed with the lens, onto the mode
indication part of the lens so as not to cause confusion.

IRIS OPERATION

- E6 -
IRIS RING