* About Bracket
Bracket is provided for fixing lens onto support rods. Use it either when total mass of lens and attached accessories
exceeds 4 kg, or when camera is used on the shoulder and mass of which exceeds 6 kg.
The supporting screw is detachable from the bracket, so the bracket is available for two types of lens support
systems having a different height from each other.
■ INSTALLAION OF THE BRACKET ONTO THE LENS
a. Align the pin at the upper center of the bracket with the hole on the lens, and insert it.
b. The bracket has a mounting screw on both sides. Tighten the screws into the lens.
INSTALLATION OF BRACKET
Lens
- E3 -
SUPPORTING SCREW
BRACKET