Daikin LX10F11B Service Manual page 43

https://daikin-p.ru
※12-10 Container I.D.
Step 1. Press
Step 2. Press key to move to the 2nd letter and press
change 2nd letter.
Step 3. Change the next letter and 7 numerals with same procedure.
Press key to determine container I.D.
※12-8 Controller Date
Step 1. Press
Step 2. Press
Step 3. Press
※12-9 Controller Time
Step 1. Press
Step 2. Press key to change MINUTE and press
※13 Optional Function Mode
Notice !!
1. Optional function setting is done at factory. Normally, setting change at site is not
necessary. (In some cases the function may not operate even after it has been set.)
2. Ensure the circuit breaker is switched OFF after Configuration Set change.
Optional Function
Bulb Mode Function
ON
Rail Mode Function
OFF
ASC Function
ON
ACT Function
ON
Quest Function
OFF
※13-1 Bulb Mode Function
※13-2 Rail Mode Function
※13-3 ASC Function
※13-4 ACT Function
key to change the 1st letter.
key to change YEAR and press
key to change MONTH and press
key to change DAY and press
key to change TIME and press
⎛
※13-1 Bulb mode function
⎝
※13-2 Rail mode function
※13-3 AST, Automatic change function of set temperature (for
※13-4 ACT, Automatic cold treatment function (for details, refer
Title display
⎛
Bulb Mode Function
⎝
⎛
Rail Mode Function
⎝
ASC Function
ACT Function
key to
key to determine.
key to determine.
key to determine.
key to determine.
key to determine.
⎞
⎠
details, refer to paragraph 1.5.1)
to paragraph 1.5.3)
Setting
ON: With bulb mode function
OFF: Without bulb mode function
ON: With rail mode function
OFF: Without rail mode function
ON: With ASC function
OFF: Without ASC function
ON: With ACT function
OFF: Without ACT function
2-15
Container I.D.
Controller Date
Controller Time
Change ⇒ Enter
⎞
⎠
⎞
⎠