Table of Contents
Advertisement
https://daikin-p.ru
※6 Back Light Set (Adjustment of LCD screen brightness)
Selection of Back Light function
ON
：Back light function available
AUTO ： Back light function available. (The back light is turned off in the absence of key operation for 5
minutes.)
OFF ：Back light off
1. Press
keys to select "ON", "AUTO", or
"OFF" and press
※ When selecting "ON" or "AUTO", the next
screen, Brightness adjustment, is displayed
(Fig. 2).
※ When selecting "OFF", the screen returns to
the Menu screen by pressing
back light is turned off.
Fig. 1
Back Light
Lighting
OFF
Brightness
▲▼:Change
ENTER:Confirm
Note: The back light function will not be activated in the battery mode.
※7 Unit Alternate
1. Temperature Alternate
Press
key to select
"℃ " or " F" and press
determine.
Unit Convert
Temperature
℃
Pressure
kPa
Ventilation Volume
m3/h
▲▼:Change
ENTER:Confirm
※8 Manual Defrost
1. Press
key to activate manual
defrosting.
＊ "DEFROST" is displayed on the
top of Operation display during
Manual Defrost operation.
During Manual Defrost operation
Manual Defrost
Press
ENTER to Start
ESC to Cancel
key to determine (Fig. 1).
key and the
Fig. 2
Back Light
Lighting
Brightness 7 (Max)
▲▼:Change
ENTER:Confirm
2. Pressure alternate
Press
"kPa", "PSI" or "Bar" and
to
press
Unit Convert
Temperature
Pressure
Ventilation Volume
▲▼:Change
ESC
ENTER:Confirm
※9 Display Alarm
1. Press
E115 CFM thermal protec...
E117 EFM thermal protec...
E101 High pressure cutout
DEFROST
E107 Comp discharge gas..
E536 INV current sensor..
CFM thermal protection
Operation Screen
activated
Brightness Adjustment
2. Adjust brightness by using
determine the selection by pressing
(Fig. 3) Brightness：1, 2, 3, 4, 5, 6, 7 (Max)
3. Returns to the Menu screen by using
Fig. 3
ON
key to select
to determine.
Temperature
℃
kPa
Pressure
m3/h
Ventilation Volume
ESC
keys to display current alarm.
＊ When there are many current alarms, they will be
displayed on more than one page.
＊"No ALARM" is displayed when there is no current alarm.
Current Alarm
1/2
NEXT
2-13
keys and
key.
Back Light
Lighting
ON
Brightness
5
▲▼:Change
ENTER:Confirm
3. Ventilation Volume Alternate
Press
key to select
"m3/h" or "CFM" and press
to determine.
Unit Convert
℃
kPa
m3/h
▲▼:Change
ENTER:Confirm
Current Alarm
E115 CFM thermal protec...
E117 EFM thermal protec...
E536 INV current sensor..
INV current sensor failure
4 times
PREV
key.
2/2
Advertisement
Table of Contents
