Safety; General Safety Information - 3M Matic 8000a-I Instructions And Parts List

3. Safety

3.1
Figure 3-1
E-Stop
Disconnect plug from power source
before machine maintenance (Figure 3-1).
Also disconnect air if the machine
has a pneumatic system.
Keep this manual in a handy place near the
machine. This manual contains information
that will help you to maintain the machine
in a good and safe working condition.
3.2
3M-Matic 8000a-I / 8000a3-I - Type 11700
™
Page 5
44-0009-2161-7 / ECO# 0078483

General Safety Information

Read all the instructions carefully
before starting work with the
machine; please pay particular
attention to sections
marked by the symbol:
The machine is provided
with a LATCHING
EMERGENCY STOP
BUTTON (Figure 3-1);
when this button is
pressed, it stops the
machine at any point in
the working cycle.
Maintain clear access
to power cord while
machine is operating.
Explanation of Signal Word and
Possible Consequences
This safety alert symbol
identifies important
messages in this manual.
READ AND UNDERSTAND
THEM BEFORE INSTALLING
OR OPERATING THIS
EQUIPMENT.
Indicates a potentially
Caution
hazardous situation,
which, if not avoided,
may result in minor or
moderate injury and/
or property damage.
Indicates a potentially
Warning
hazardous situation,
which, if not avoided,
could result in death
or serious injury and/
or property damage.
Caution
Prohibition
Information
Electrical Sup-
ply Disconnect
before work
or servicing
machine
Warning!
Sharp knife
Emergency
Stop
(Latching)
Keep hands out
of movining
parts
Physical Earth
connection
International - ENG
February 2021