3M Matic 8000a-I Instructions And Parts List page 132

Warranty
2.3
3M-Matic Accuglide 3 - 3 Inch Taping Head
™
Page viii
44-0009-2071-8 / ECO# 0078045
Warranty
Within the limits of what is set out below, Seller agrees to repair or replace
without cost to Buyer any defective goods when such defect occurs within a
period of twelve (12) months from the date in which Seller's goods have been put
into use, but in no event beyond fourteen (14) months from the date of shipment.
Expressly excluded from this warranty are those parts subject to normal wear and
tear (by way of illustration, but not limitation, such parts as belts, rubber rollers,
gaskets, brushes, etc.) and electrical parts. Buyer must immediately notify Seller of
any defect, specifying the serial number of the machine. Buyer shall send to Seller
the defective item for repair or replacement. Seller will perform the repairs or
provide a replacement within a reasonable period of time. Upon effecting such repair
or replacement, Seller shall have fulfilled its warranty obligations. In the event the
repairs or replacement must be effected at the place where the machine is installed,
all expenses for labor, travel and lodging of Seller's personnel shall be sustained by
the Buyer. Buyer will be invoiced in conformity with Seller's standard charges for
the services rendered. Seller is not responsible for defects resulting from:
- Events which develop subsequently to delivery
- Improper use of the machine
- Lack of proper maintenance
- Tampering with the machine or repairs effected by the Buyer
Seller will not be liable for any injury to persons or things or for the failure of
production. With respect to the materials not manufactured by Seller, such as
motors and electrical equipment, Seller will grant to Buyer the same warranty
Seller receives from its supplier of such materials. Seller does not warrant the
compliance of its machines with the laws of non-EEC countries in which the
machines may be installed, nor does it warrant compliance with laws or standards
relating to the prevention of accidents or pollution. Adaptation of Seller's machines
to the aforesaid laws or standards shall be the responsibility of Buyer who assumes
all liability therefore. Buyer shall indemnify and hold Seller harmless against any
claim by third parties resulting from failure to comply with the aforesaid laws and
standards.
Source Document for all related Manuals/Translations
Original Instructions
International - ENG
February 2021