Section 3 − Definitions - Miller Axcess E Dual Owner's Manual

3-1. Additional Safety Symbols And Definitions
.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Protect yourself from electric shock by insulating yourself from work and ground.
Disconnect input plug or power before working on machine.
Keep your head out of the fumes.
Use forced ventilation or local exhaust to remove the fumes.
Use ventilating fan to remove fumes.
Keep flammables away from welding. Do not weld near flammables.
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
OM-248965 Page 10
SECTION 3 − DEFINITIONS
Safe1 2012−05
Safe37 2012−05
Safe2 2012−05
Safe3 2012−05
Safe5 2012−05
Safe6 2012−05
Safe8 2012−05
Safe10 2012−05
Safe12 2012−05
Safe14 2012−05