Bar Code Scanner; Coin Dispenser - Sharp UP-3500 Instruction Manual

I I I I I Bar code scanner
(9 SYSTEM
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [2 DEVICE CONFIGURATIONS]
button to display the detail menu. Then touch the [1 BAR CODE SCANNER] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
BAUD RATE
DATA BITS
PARITY
STOP BIT
I I I I I Coin dispenser
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [2 DEVICE CONFIGURATIONS]
button to display the detail menu. Then touch the [2 COIN DISPENSER] button to program.
(3) Enter the channel number and touch the [ENTER] key.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
248
➝
2 DEVICE CONFIGURATIONS
0 – 5: "0" means no RS-232 channel is assigned.
Transmission data rate (Baud rate)
19200 bps:
9600 bps:
4800 bps:
7 bits:
8 bits:
NON: Non-parity
ODD: Odd parity
EVEN: Even parity
1 bit:
2 bits:
➝
(9 SYSTEM 2 DEVICE CONFIGURATIONS
0 – 5: "0" means no RS-232 channel is assigned.
➝
1 BAR CODE SCANNER .......... PGM2)
Parameter
➝
2 COIN DISPENSER .......... PGM2)
Parameter