Scale; E-Pay Device Type2 (Data Tran) - Sharp UP-3500 Instruction Manual

I I I I I Scale
(9 SYSTEM
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [2 DEVICE CONFIGURATIONS]
button to display the detail menu. Then touch the [3 SCALE] button to program.
(3) Enter the channel number and touch the [ENTER] key.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
I I I I I E-pay device type2 (DATA TRAN)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [1 TYPE#2] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
TIME OUT1
TIME OUT2
TIME OUT3
TEL NO.
TEL ID
TEL MODE
FTS MODE
AMOUNT%
➝
2 DEVICE CONFIGURATIONS
0 – 5: "0" means no RS-232 channel is assigned.
(9 SYSTEM
[0] This means local device. (RS connection)
[1 – 254] This means re-routed device.
0 – 5: "0" means no RS-232 channel is assigned.
Time out timer for ACK/NAK: 3 digits (1 to 255 (sec)/10)
Time out timer for response of authorization: 3 digits (1 to 255 (sec): 99)
Time out timer for batch close: 4 digits (1 to 3000 (sec): 99)
Phone number for dial out: 1-25 character (0 to 9, W, comma)
Password for dial out: 8 digits (00000000 to 99999999)
PULSE:
TONE:
ENABLE: Enables FTS mode
DISABLE: Disables FTS mode
Authorization rate to allow CH tip: 0.00% -100.00%
➝
3 SCALE .......... PGM2)
Parameter
➝
3 EPAY DEVICE PRESET
Parameter
➝
1 TYPE#2 .......... PGM2)
249