Chit Format; Bar Code Scanner - Sharp UP-3500 Instruction Manual

I I I I I Chit format
(1) Select the PGM1 or PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) In the PGM1 mode, touch the [4 PRINTERS] button to display the menu, and touch the [14 CHIT
FORMAT] button to program for the chit format.
(2)' In the PGM2 mode, touch the [9 SYSTEM] button to display the menu, and touch the [1 PRINTERS]
button to display the detail menu. Then touch the [14 CHIT FORMAT] button to program.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
QTY IS 1
PLU CODE
UNIT PRICE
AMOUNT
I I I I I Bar code scanner
(9 SYSTEM
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [2 DEVICE CONFIGURATIONS]
button to display the detail menu. Then touch the [1 BAR CODE SCANNER] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
BAUD RATE
DATA BITS
PARITY
STOP BIT
186
➝
(4 PRINTERS 14 CHIT FORMAT .......... PGM1)
➝
(9 SYSTEM 1 PRINTERS
Parameter
SKIP/PRINT
SKIP/PRINT
SKIP/PRINT
SKIP/PRINT
➝
2 DEVICE CONFIGURATIONS
Parameter
0 – 5
"0" means no RS-232 channel is assigned.
Transmission data rate (Baud rate) 19200 bps,
9600 bps, 4800 bps
7 bits/8 bits
NON/ODD/EVEN
1 bit/2 bits
➝
14 CHIT FORMAT .......... PGM2)
Print format for chit receipt
➝
1 BAR CODE SCANNER .......... PGM2)
Device assign
Transmission speed
Data bit
Parity bit
Stop bit
Classification
Classification
www.cashregisters.net