Employee Id - Sharp UP-3500 Instruction Manual

I I I I I Employee ID
Employee code: 10 digits (0 to 9999999999)
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [4 WORK FORCE] button to display the menu, and touch the [2 EMPLOYEE] button to
display the detail menu.
(3) Touch the [1 EMPLOYEE ID] button to display the employee list.
(4) Touch or enter the employee number and touch the [ENTER] key to program the employee data.
(5) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (5) satisfactorily.
(6) To terminate the programming, touch the [EXIT] key.
Text
SECRET CODE
NAME
CASHIER CODE
AUTHORITY LEVEL
DAILY STD.HOURS
DAILY OT HOURS
WEEKLY STD.HOURS
WEEKLY OT HOURS
LOCATION#1
LOCATION#2
LOCATION#3
LOCATION#4
LOCATION#5
LOCATION#6
LOCATION#7
AUTO SHIFT FUNC.
OPEN TIME
OPEN TIME AM/PM
CLOSE TIME
CLOSE TIME AM/PM
When the "DEL" key is touched on table number selection menu, the table is deleted.
➝
(4 WORK FORCE 2 EMPLOYEE
Employee secret code: max. 8 digits (00000001 to 99999999/00000000)
Employee name: max. 8 characters
Cashier code link: max. 4 digits (0001 to 9999)
Authority level: 1 digit (1 to 5) (Low 1 ➝ 5 High)
Daily standard hours: max. 3 digits (0 to 999)
Daily over-time hours: max. 3 digits (0 to 999)
Weekly standard hours: max. 3 digits (0 to 999)
Weekly over-time hours: max. 3 digits (0 to 999)
Job location 1: max. 2 digits (1 to 99/0)
Job location 2: max. 2 digits (1 to 99/0)
Job location 3: max. 2 digits (1 to 99/0)
Job location 4: max. 2 digits (1 to 99/0)
Job location 5: max. 2 digits (1 to 99/0)
Job location 6: max. 2 digits (1 to 99/0)
Job location 7: max. 2 digits (1 to 99/0)
ENABLE: AUTO shift function enabled
DISABLE: AUTO shift function disabled
AUTO shift open time:
4 digits: Hour 2 digits (01 to 12)/Minute 2 digits (00 to 59)
AUTO shift open time AM/PM selection (AM or PM)
AUTO shift close time:
4 digits: Hour 2 digits (01 to 12)/Minute 2 digits (00 to 59)
AUTO shift close time AM/PM selection (AM or PM)
➝
1 EMPLOYEE ID ... ....... PGM2)
Parameter
179