E-Pay Device Pin Pad; E-Pay Device Ic Card - Sharp UP-3500 Instruction Manual

I I I I I E-pay device PIN pad
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [2 PIN PAD] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
TIME OUT1
TIME OUT2
BAUD RATE
I I I I I E-pay device IC card
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [9 SYSTEM] button to display the menu, and touch the [3 EPAY DEVICE PRESET] button to
display the detail menu. Then touch the [3 IC CARD] button to program.
(3) Touch the required program item, and enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CHANNEL#
TIME OUT1
250
➝
(9 SYSTEM
0 – 5: "0" means no RS-232 channel is assigned.
Time out timer for ACK/NAK: 3 digits (1 to 255 (sec): 10)
Time out timer for response of PIN data: 3 digits (1 to 255 (sec): 99)
Transmission data rate (baud rate)
19200 bps:
9600 bps:
4800 bps:
2400 bps:
1200 bps:
300 bps:
➝
(9 SYSTEM 3 EPAY DEVICE PRESET
0 – 5 "0" means no RS-232 channel is assigned.
Time out timer: 3 digits (1 to 255 (sec): 60)
3 EPAY DEVICE PRESET
Parameter
Parameter
➝
2 PIN PAD .......... PGM2)
➝
3 IC CARD .......... PGM2)