Drive-Thru Function - Sharp UP-3500 Instruction Manual

I I I I I Drive-thru function
A second GLU function can be used as the drive-thru function. This system looks up drive-thru codes
automatically (First In/First Out).
This drive-thru system provides two types of POS terminal functions (Order taker, cashier station).
Drive-thru screen
The drive-thru screen can be displayed by touching the [D-DISP] key or by finalizing the drive-thru
registration (refer to PGM: FUNC.SELECTING).
When the [HOME] or [CANCEL] key is touched, the screen is changed to the ordinary screen from
the drive-thru screen. The screen can also be changed to the ordinary screen by beginning the drive-thru
registration with touching the [N.C. 2] key.
New car
For a new car, open a new drive-thru balance (the code is automatically generated).
Cover count
[N.C. 2]
(max. 2 digits)
The [FINAL] key is used for the optional function (temporary finalization).
You can temporarily finalize a guest check by touching the [FINAL] key. Depending upon your terminal's
programming this prints out a guest check to show the current balance, including tax. The guest check,
however, is still "open." This means you can still make additional orders to it.
Reorder entries
For making additional drive-thru entries, use the following procedure:
[PBAL 2] [Item entries]
The drive-thru list table can be displayed by touching the [D-T LIST] key.
To operate the reorder entries, touch a corresponding line of the drive-thru list and touch the [ENTER]
key.
To exit from the drive-thru list screen, touch the [CANCEL] key.
[CV CNT] [Item entries]
[BILL]
[SRVC]
To issue the bill
[FINAL]
[BILL]
[SRVC]
To issue the bill
[FINAL]
49