Function Selections - Sharp UP-3500 Instruction Manual

I I I I I Function selections
(7 TERMINAL
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [7 TERMINAL] button to display the menu, and touch the [4 OPTIONAL SETTINGS] button
to display the detail menu. Then touch the [1 FUNCTION SELECTIONS] button to program.
(3) Touch the required program item, and select the parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
LEVEL SFT METHOD
RETURN TO LEVEL1
COVER COUNT
COVER CALC
TABLE NUMBER
TIP ENTRY METHOD
CSH DRW ASSIGN
DRIVE SCREEN
DTHRU SEQUENCE
VD TOTAL CHK
AUTO HOURLY
ISBN PRICE
T-LOG FULL
E.J. FULL
(Continued to the next page.)
222
➝
4 OPTIONAL SETTINGS
PLU level shift;
STAY DOWN: Stay-down (lock shift) mode
ONE SHOT: Automatic return mode
BY ONE RCPT.: Returns the PLU level to level 1 by one receipt.
BY ONE ITEM: Returns the PLU level to level 1 by one item.
(When PLU level system is "ONE SHOT", PLU level returns to level 1)
COMPULSORY: Compulsory cover count entry (GLU operations)
NON-COMPULSORY: Non-compulsory cover count entry (GLU operations)
Cover count calculation;
COUNT UP 1: Cover counter is counted up by one (GLU operations).
NO CHANGE: Cover counter is counted up by entered number (GLU operations).
COMPULSORY: Compulsory table number entry (GLU operations)
INHIBIT: Inhibited table number entry (GLU operations)
AMOUNT: Manual tip entry
FIX RATE: Tip entry using a programmed rate
COMPULSORY: Compulsory cashier drawer assignment at sign-on
INHIBIT: Inhibited cashier drawer assignment at sign-on
MANUAL: Only when the function key for the drive-thru screen is touched, the
drive-thru screen appears.
AUTO: When the drive-thru registration is made, the drive-thru screen becomes the
default screen automatically. If the function key for the drive-through screen is
touched, the drive-thru screen appears also.
(Indication screen change method)
TOUCH: Transaction on the screen can be opened immediately by touching window.
TOUCH+PBAL2: Transaction on the screen can be opened by touching window to
select and touching [PBAL2] key
NOT: Not prompt at void of total check
APPEAR: Appear prompt at void of total check
DISABLE: Disables automatic hourly report.
ENABLE: Enables automatic hourly report.
If "ENABLE" is selected, a hourly report may be issued at hourly intervals automatically.
INHIBIT: Inhibit price entry after ISBN or ISSN
COMPULSORY: Compulsory price entry after ISBN or ISSN
CONTINUE: Not lock entries at a satellite even when T-LOG butter becomes full.
LOCK: Lock entries at a satellite when T-LOG buffer becomes full.
CONTINUE: Not lock programming when electric journal (EJ) file buffer is full.
LOCK: Locks programming when electric journal file buffer is full.
➝
1 FUNCTION SELECTIONS .......... PGM2)
Parameter