Report Programming - Sharp UP-600 Instruction Manual

Report Programming

Use the following procedure to select any option included in the report group:
The following illustration shows those options included in the report programming group.
12 REPORT 1 0 SKIP
2 HOURLY RPT
3 STACKED RPT
170
1.
In the SETTING window, select "12 REPORT."
• The REPORT window will appear.
2.
Select any option from the following list:
1 0 SKIP:
2 HOURLY RPT:
3 STACKED RPT:
See "Zero skip" on page 171.
See "Hourly report" on page 171.
See "Stacked report" on page 172.
Zero skip
Hourly report
Stacked report