Report Programming - Sharp UP-3301 Instruction Manual

Report Programming

Use the following procedure to select any option included in the report group:
Procedure
M
The following illustration shows those options included in the report programming group.
11 REPORT 1 0 SKIP
2 GNR RPT FORMAT
3 HOURLY RPT
4 STACKED RPT
1.
In the SETTING window, select "11 REPORT."
• The REPORT window will appear.
2.
Select any option from the following options list:
1 0 SKIP:
2 GNR RPT FORMAT: General report format
3 HOURLY RPT:
4 STACKED RPT:
➡ See "I Zero skip" on page 196.
➡ See "I General report format" on page 197.
➡ See "I Hourly report" on page 197.
➡ See "I Stacked report" on page 198.
Zero skip
Hourly report
Stacked report
195