Automatic Sequencing Key Programming - Sharp UP-600 Instruction Manual

Automatic Sequencing Key Programming

If you program frequently performed key operations for the AUTO keys, you can enter those key operations
simply by pressing the corresponding AUTO keys in key operations.
Select "03 AUTO KEY" from the
PGM2 window.
200
To program an automatic sequencing key as follows:
1.
Press the automatic sequencing key which you want to
program.
AUTO
1
2.
Enter the desired sequence to use the automatic sequencing
key in the programmed sequence.
700
9
3.
Press the automatic sequencing key again.
AUTO
1
4.
Press the key to finalize the programming.
CANCEL
CA/AT