Table of Contents
Advertisement
3
Press the ENTER (Ent) button.
The data is saved in the "Memory Stick".
Notes
• Data saving, copying and deleting using the "Memory
Stick" is not available on BKM-15R or BVM-A14F5.
• Data copying from the BVM-A series or PVM-L series
monitor is not available.
98
Assigning the Function on the Function Button
Assigning the Function
on the Function Button
You can assign a function other than the factory preset on
the function button of the controller.
1
Select the Function Key menu in the Controller menu.
2
Select F1 to F16 button, and then the function assigned
on each button.
The following functions are assigned.
Scan Mode
Native Scan
16 : 9
H Delay
V Delay
External Sync
Comb
Char Off
Color Temp
Capture Load
Aperture
Mono
Blue Only
R Off
G Off
B Off
Chroma Up
Black Frame Insertion
Interlace
Pixel Zoom
Marker
Aspect Marker
Area Marker 1
Area Marker 2
Side by Side
Wipe
Butterfly
Blending
Error Notify Clear
Degauss
Black Detail Mode
Audio Level Meter
ALM Hold Reset
Time Code
For details on the assigned function, see "Function Key"
(page 84) in the Controller menu.
Advertisement
Table of Contents
