Displaying The Area Marker Or Aspect Marker; Assigning The Function On The Function Button - Sony BVM-L230 Operation Manual

Displaying the Area
Marker or Aspect Marker
The monitor is equipped with two area markers and center
marker as the safe area marker and aspect marker for
confirming the picture angle.
1
Set the marker to display to On in the Marker menu
(page 50) of the Display Function menu.
2
Input the signal.
3
Set the MARKER button of the controller to on.
All the markers that are set to On in the Marker menu
of the Display Function menu are displayed.
The MARKER button lights.
To cancel the marker display
Set the MARKER button to off.
64
Displaying the Area Marker or Aspect Marker / Assigning the Function on the Function Button
Assigning the Function
on the Function Button
You can assign a function other than the factory preset on
the function button of the controller.
1
Select the Function Key menu in the Controller menu.
2
Select F1 to F16 button, and then the function assigned
on each button.
The following functions are assigned.
Scan Mode
Native Scan
16 : 9
H Delay
V Delay
External Sync
Comb
Char Off
Color Temp
Aperture
Mono
Blue Only
R Off
G Off
B Off
Chroma Up
Black Frame Insertion
Interlace
Marker
Degauss
For details on the assigned function, see "Function Key"
(page 59) in the Controller menu.