Table of Contents
Advertisement
Menu
1 Pin to 8 Pin
74
System Configuration Menu
Function and operation ([
Assigns the function to each pin of the PARALLEL REMOTE connector when Parallel Remote
is set to On.
1 Pin: [CH01]
2 Pin: [CH02]
3 Pin: [External Sync]
4 Pin: [Mono]
5 Pin: [Marker]
6 Pin: [unused]
7 Pin: [unused]
8 Pin: [Tally]
You can change the assignment to the following functions for pins 1 to 8.
Parallel Remote (1/4)
CH01 to 30: Selects a channel number. Enter the desired channel number with the
numeric buttons.
----: Unused
Under Scan: The under scan function. When it is set to off, the scan mode is set to
Normal Scan.
Over Scan: The over scan function. When it is set to off, the scan mode is set to Normal
Scan.
Native Scan: The native scan function
16:9: The 16:9 or 1.896:1 (digital cinema signal 2048 × 1080) aspect ratio function.
When it is set to off, the aspect ratio is set to 4:3 or 2.39:1.
The aspect ratio may be fixed to 16:9 due to the signal format.
For details, see "Available Signal Formats" on page 108.
H Delay: The horizontal sync display function
V Delay: The vertical sync display function
External Sync: The synchronization function to external sync signals
Comb: The comb filter function. When it is set to off, the trap · band-pass filter (Trap/
BPF) is selected.
You can select the type of comb filter in NTSC Comb Filter menu (page 60) of the Display
Setting menu.
Parallel Remote (2/4)
Aperture: The aperture modification function
Mono: The monochrome display function
Blue Only: The function by which red and green signals are cut and only the blue signal
is displayed as a monochrome picture
R Off: The cutting function of red signals
G Off: The cutting function of green signals
B Off: The cutting function of blue signals
Chroma Up: 12 dB up function of the chroma setting value
Black Frame Insertion: The display function in black frame insertion mode
Interlace: The display function in interlace mode
Tally: The function to turn on the tally lamp
Parallel Remote (3/4)
Marker: The display function of all markers
Aspect Marker: The display function of the aspect marker
Area Marker 1: The display function of the area marker 1
Area Marker 2: The display function of the area marker 2
Side by Side: The side by side function
Wipe: The wipe function
Butterfly: The butterfly function
Blending: The blending function
Error Notify Clear: The function to cancel the notification of the gamut error detection
Power Off: The monitor power function
Parallel Remote (4/4)
Black Detail Mode: The display function in black detail mode
Audio Level Meter: The display function of the audio level meter
ALM Hold Reset: The function to cancel the peak hold of the audio level meter
Time Code: The display function of the time code
For the pin assignment, see "PARALLEL REMOTE connector" in Location and Function of
Parts on page 18.
]: factory setting)
Advertisement
Table of Contents
