Table of Contents
Advertisement
Appendixes
Specifications
General
LCD panel
a-Si TFT Active Matrix
Picture size
16.52 inches
Display area
365.76 (H) × 205.74(V)
Resolution
1920 (H) × 1080 (V) pixel
Backlight
High-purity LEDs
Panel drive
RGB 10 bit
Panel frame rate
96/100/120 Hz
Viewing angle 85º/85º/85º/85º
(up/down/left/right, contrast 10:1)
Pixel efficiency 99.99%
Warm-up time Approx. 30 minutes
Power consumption
Approx. 130 W (AC power supply)/
Approx. 100 W (AC power supply)/
Power requirements
100 to 240 V AC,
1.5 to 0.7 A, 50/60 Hz
24 to 28 V DC,
5.4 to 4.6 A
Peak inrush current
(1) Power ON, current probe method:
(2) Hot switching inrush current,
Mass
Approx. 14 kg (30 lb 14 oz)
Input/Output
Option slot
Four slots
102
Specifications
approx. 120 W (DC power supply)
(at maximum load, the luminance
compensation due to the aged
deterioration of the LED is
included.)
approx. 90 W (DC power supply)
(the BKM-243HS is attached, the
default status)
20 A (100 V), 53 A (240 V)
measured in accordance with
European standard EN55103-1:
10 A (230 V)
Signal format
Refer to "Available Signal Systems"
(page 106) and "Available Signal
Formats" (page 108).
PC input
DVI-D × 1
HDCP correspondence
Signal format
Refer to "DVI-D" (page 112) of
"Available Signal Formats".
TM
HDMI
HDMI
× 1
HDCP correspondence, Deep Color
correspondence
Signal format
Refer to "HDMI" (page 113) of
"Available Signal Formats".
Control
OPTION A: Mini-DIN 8-pin (female) ×
1
OPTION B: USB (Type A) type × 1
LAN (10BASE-T/100BASE-TX): RJ-
45 × 1
PARALLEL REMOTE: D-sub 9-pin
(female) × 1
DC 5V OUT: Circle 4-pin (female) × 1
Picture performance
Normal scan
0% scan
Native scan
Mapping the pixels of the signal to the
panel to one-to-one mode, or
displaying an SD signal of non-
square pixels (the number of H
pixels of the signal system is 720 or
1440) or a 640 × 480 SD signal of
DVI video/HDMI video by scaling
processing of doubling for the V
direction and correct aspect ratio for
the H direction and also optimizing
and displaying a picture by
modifying the aperture coefficient
value, filter coefficient value, etc.
Under scan
3% under scan
Over scan
Mask of 5% over scan portion in the
normal scan
Color temperature
D56, D61, D65, D93, D-Cine*, (Setting
possible in other color temperature)
Advertisement
Table of Contents
