Connecting The Controller (Bkm-16R); Connecting The Multiple Units With The Lan - Sony Trimaster BVM-L170 Operation Manual

Lcd video monitor
Hide thumbs Also See for Trimaster BVM-L170:
Table of Contents

Advertisement

Connecting the Controller (BKM-
16R)
Monitor
NETWORK
PEER TO
LAN
PEER
LAN (10/100)
Set to PEER TO
connector
PEER.
SMF-700, etc.
DC 5V/12V IN
connector
Controller
(BKM-16R)
NETWORK
LAN
PEER TO PEER
Set to PEER TO PEER.

Connecting the Multiple Units with the LAN

The controller controls up to 32 monitors. Up to four
controllers are connected to one monitor in single mode.
Note
The controller cannot control monitors in another
subnetwork.
1
Turn off the MAIN POWER switch of the monitor
before connecting the units.
2
Set the NETWORK switches of the monitor and the
controller to PEER TO PEER.
3
Connect the LAN (10/100) connector of the monitor
and the LAN (10/100) connector of the controller by
using the SMF-700 or the cable supplied with the
BKM-39H, or a 10BASE-T/100BASE-TX straight
LAN cable (shielded-type, optional).
Note
When an optional LAN cable is connected, use a
shielded-type cable to prevent a malfunction due to
noises.
4
Connect the DC 5V OUT connector of the monitor and
the DC 5V/12V IN connector of the controller by using
the SMF-700 or the cable supplied with the BKM-39H.
DC 5V OUT
Or connect the output cable of the AC adaptor supplied
connector
with the controller to the DC 5V/12V IN connector of
the controller.
LAN (10/100)
connector
23
Connections

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trimaster bvm-l231

Table of Contents