Sony Trimaster BVM-L170 Operation Manual page 71

Menu
Butterfly
Blending
Error Notify Clear
Black Detail Mode
Audio Level Meter
ALM Hold Reset
Time Code
Function and operation ([
Sets whether or not to display in the butterfly display ([Off] or On).
Note
The butterfly display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
Sets whether or not to display in the blending display ([Off] or On).
Note
The blending display is not set in the following cases:
• When the internal signal is displayed
• When Pixel Zoom is set to on
When the item is selected, the notification of the gamut error detection is cleared.
Note
When Gamut Error Display is set to Off or Notification Reset is set to Auto in the Gamut Error
Display menu of the Display Function menu, you cannot select Error Notify Clear.
Sets whether or not to display the signal in black detail mode ([Off] or On).
Notes
• The black detail mode is not set in the following cases:
– When Interlace is set to On
– When Black Frame Insertion is set to On
– When H Delay/V Delay is set to On
• Use the controller with software version 1.3 or higher to assign this function to the function
button of the controller.
Sets whether or not to display the audio level meter ([Off] or On).
Notes
• When the option slot number in which the BKM-250TG is installed is not selected in Slot No
of the Input Configuration menu, the audio level meter cannot be displayed.
• Use the controller with software version 1.4 or higher to assign this function to the function
button of the controller.
When the item is selected, the peak hold of the audio level meter is canceled.
Notes
• The ALM Hold Reset is not selected in the following cases:
– When the option slot number in which the BKM-250TG is installed is not selected in Slot
No of the Input Configuration menu
– When Audio Level Meter is set to Off
– When Peak Hold is set to Off or Auto in the Audio Level Meter menu of the On Screen
Set menu of the System Configuration menu
• Use the controller with software version 1.4 or higher to assign this function to the function
button of the controller.
Sets whether or not to display the time code ([Off] or On).
Notes
• When the option slot number in which the BKM-250TG is installed is not selected in Slot No
of the Input Configuration menu, the time code cannot be displayed.
• Use the controller with software version 1.4 or higher to assign this function to the function
button of the controller.
]: factory setting)
71
Display Function Menu