Assigning The Function On The Function Button; Upgrading The Monitor And Controller; Saving The Upgrade Data In A "Memory Stick Pro - Sony PVM-L2300 Operation Manual

Assigning the Function
on the Function Button
You can assign a function other than the factory preset on
the function button of the controller.
1
Select the Function Key menu in the Controller menu.
2
Select F1 to F16 button, and then the function assigned
on each button.
The following functions are assigned.
Scan Mode
Native Scan
16 : 9
H Delay
V Delay
External Sync
Comb
Char Off
Color Temp
Capture Load
Aperture
Mono
Blue Only
R Off
G Off
B Off
Chroma Up
Black Frame Insertion
Interlace
Pixel Zoom
Marker
Aspect Marker
Area Marker 1
Area Marker 2
Side by Side
Wipe
Butterfly
Blending
Error Notify Clear
Degauss
Black Detail Mode
Audio Level Meter
ALM Hold Reset
Time Code
Checkerboard
L/R Switch
For details on the assigned function, see "Function Key"
(page 78) in the Controller menu.
Upgrading the Monitor
and Controller
You can upgrade the monitor and the controller with the
data saved in a "Memory Stick".
You can upgrade the following data:
Monitor: Software program
Kernel
FPGA data
Controller: Software program
Kernel
Notes
• Upgrading of the software for the controller is available
for version 1.11 or later of the software for the controller,
and upgrading of the controller kernel is available for
version 1.2 or later.
• Use a "Memory Stick PRO" for upgrading.
If a "Memory Stick" other than "Memory Stick PRO" is
used, the upgrading may not be executed correctly.
• To initialize the "Memory Stick PRO", use a machine
and application corresponding to "Memory Stick PRO".
If Windows Explorer is used for initialization, the
upgrading may not be executed correctly.
• When the unit is upgraded, use the AC power Supply for
the monitor.
To get the upgrade data
Contact your Sony representative.
Saving the Upgrade Data in a
"Memory Stick PRO"
Save the upgrade data (MSSONY folder) in a "Memory
Stick PRO".
Save the whole MSSONY folder directly in the root
directory of the Memory Stick drive.
To confirm saving the data correctly
Double-click on the file including checksum.bat in the file
name.
• MSSONY/MONITOR/PVM_L/UPDATES/SOFT/PVM
_L2300/checksum_soft.bat
• MSSONY/MONITOR/PVM_L/UPDATES/KERNEL/P
VM_L2300/checksum_kernel.bat
• MSSONY/MONITOR/PVM_L/UPDATES/FPGA/PVM
_L2300/checksum_fpga.bat
• MSSONY/MONITOR/BVM_L/UPDATES/SOFT/BKM
_16R/checksum_soft.bat
• MSSONY/MONITOR/BVM_L/UPDATES/KERNEL/B
KM_16R/checksum_kernel.bat
Assigning the Function on the Function Button / Upgrading the Monitor and Controller
93