Controller Installation
Controller Installation
Page 4
NOTE: Record your controller serial number in a safe location in case you need to
contact LSI.
NOTE: SATA II is the only type of SATA supported by this RAID controller.
Back up your data before changing your system configuration.
!
Otherwise, you might lose data.
CAUTION
1. Unpack the RAID Controller
Unpack the RAID controller in a static-free environment. Remove it from the
antistatic bag, and inspect it for damage. If the RAID controller appears to be
damaged, or if the MegaRAID Universal Software Suite CD is missing, contact LSI or
your MegaRAID OEM support representative.
MegaRAID SAS 9285-8e RAID Controller Quick Installation Guide
LSI Corporation
|
December 2010