Table of Contents
Advertisement
Controller Installation
Page 8
NOTE: Refer to the guide for your motherboard for information about the PCI-Express
slot.
Figure 3: Installing the MegaRAID SAS 9285-8e RAID Controller
Screw
Press
Here
85082-01
Edge of
Motherboard
5. Configure and Install the SAS Devices, SATA II Devices, or Both in the Host
Computer Case
Refer to the documentation for the devices for any preinstallation configuration
requirements.
6. Connect the RAID Controller to the SAS Devices, SATA II Devices, or Both in the
Host Computer Case
Use SAS cables to connect the RAID controller to SAS devices, SATA II devices, or
both. See
Figure 2
to view the connector locations.
NOTE: Refer to the MegaRAID 6Gb/s SAS RAID Controllers User Guide on the
MegaRAID Universal Software Suite CD for detailed information about the SAS cables.
7. Turn on the Power to the Computer
MegaRAID SAS 9285-8e RAID Controller Quick Installation Guide
Press
Here
PCI Socket
LSI Corporation
|
December 2010
Advertisement
Table of Contents
