Table of Contents
Advertisement
MegaRAID SAS 9285-8e RAID Controller Quick Installation Guide
Quick Installation Guide
MegaRAID SAS 9285-8e RAID Controller
Product Overview
|
LSI Corporation
December 2010
Thank you for purchasing the LSI™ MegaRAID
MegaRAID controller provides reliability, high performance, and fault-tolerant drive
subsystem management. Before you install your RAID controller, please take a few
minutes to read this quick installation guide. If you need more information about any
topic covered in this guide, refer to the related documents on your MegaRAID Universal
Software Suite CD.
The MegaRAID SAS 9285-8e RAID controller is a low-profile PCI-Express RAID controller
that offers a 6-Gb/s transfer rate. It controls eight external SAS/SATA ports through two
SFF-8088 x4 external mini SAS connectors.
The MegaRAID SAS 9285-8e RAID controller has a TMM02 module, which is an
on-board 512MB or 1GB non-volatile DDR3 1333MT/s transportable memory module.
The TMM02 unit connects remotely to the LSI intelligent Battery Backup Unit 09
(LSIiBBU09).
For more information about the LSIiBBU09 unit, refer to the MegaRAID LSIiBBU09
Intelligent Battery Backup Unit Quick Installation Guide on the MegaRAID Universal
Software Suite CD.
For more information about the TMM02 module, refer to the Cache Backup Products
for MegaRAID SAS RAID Controllers User Guide on the MegaRAID Universal Software
Suite CD.
Figure 1
shows the MegaRAID SAS 9285-8e RAID controller.
Figure 1: MegaRAID SAS 9285-8e RAID Controller
®
6Gb/s SAS 9285-8e RAID controller. Your
Product Overview
Page 3
Advertisement
Table of Contents
