Technical Support - LSI MegaRAID SAS 9285-8e Quick Installation Manual

Technical Support

Technical Support
Page 10
 RAID 10 (RAID 1 and RAID 0 in spanned groups): RAID 10 uses mirrored pairs of
drives to provide complete data redundancy. RAID 10 provides high data
throughput rates.
 RAID 50 (RAID 5 and RAID 0 in spanned groups): RAID 50 uses both parity and
drive striping across multiple drives to provide complete data redundancy. RAID 50
provides high data throughput rates.

RAID 60 (RAID 6 and RAID 0 in spanned groups): RAID 60 uses both distributed
parity across two parity drives and drive striping across multiple drives to provide
complete data redundancy and high fault tolerance.
NOTE: Refer to the MegaRAID SAS Software User Guide on the MegaRAID Universal
Software Suite CD for more information about RAID levels
For assistance in installing, configuring, or running the SAS 9285-8e RAID controller,
contact an LSI Technical Support representative.
Click the following link to access the LSI Technical Support page for storage and board
support:
http://www.lsi.com/support/storage/tech_support/index.html
From this page, you can send an email or call Technical Support, or submit a new
service request and view its status.
Support Request:
http://www.lsi.com/support/support_form.html
Phone Support:
http://www.lsi.com/support/storage/phone_tech_support/index.html
1-800-633-4545 (North America)
00-800-5745-6442 (International)
NOTE: The international toll-free number does not require country-specific access
codes.
MegaRAID SAS 9285-8e RAID Controller Quick Installation Guide
LSI Corporation
|
December 2010