Table of Contents
Advertisement
Chapter 2 Preparations
<5> Connect two power cords that removed in
step <3> to connector on the control kit.
(The parts indicated by circle on the figure on
the right)
6) Connect two power cords on control kit to the
connector on the motherboard you removed at
step <3>.
6.
Install the LED cable to the device tray you
removed at step 4.
<1> Attach the bracket part of the LED cable to
the right edge of the device tray.
<2> Fix with a flat-head screw.
7.
At the position marked in the figure, fix the LED
cable to device tray with a cable tie.
76
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
Flat-head screw
Advertisement
Table of Contents
