Table of Contents
Advertisement
Chapter 2 Preparations
Set up the server as shown in the figure after attaching
the stabilizers.
The server in which the
stabilizer is installed in slot 1
(2) Mounting for horizontal
To mount the server horizontally, attach the provided rubber feet to the positions shown in the figure.
Tips
When two or more servers are installed vertically side by side, installing the
stabilizers in slots 1 and 2 alternately can remove the gap between servers.
Attach the rubber feet on the right
side of the server as shown in the
figure.
Important When the server is horizontally mounted, do not put devices that weigh more
than 5 kg on the server.
Express5800/T110i-S User's Guide
2. Installation and Connection
The server in which the
stabilizer is installed in slot 2
103
Advertisement
Table of Contents
