Table of Contents
Advertisement
Assembling Your Treadmill
Step 6: Securing Console
A
Slide the console fully into the mounting brackets. If the console does
not want to slide in completely, loosen the four pre-installed M8 x 15L
bolts (16) with the provided 6mm Allen wrench to eliminate any friction.
B.
Once the console is fully installed, tighten the four M8 x 15L Bolts.
Step 7: Cup Holder Attachment
A. Remove the four pre-installed M4 x
10L screws (17) with the provided
Phillip's head screwdriver from the
bottom of the right cup holder.
30
16
Pre-installed
View from beneath
A
Pre-installed
6mm Allen
M8 x 15L
Wrench
M4 x 10L
5mm Allen
Wrench w/
17
Phillips
(x4)
(x4)
Advertisement
Table of Contents
