Advertisement
LEDs
The top panel LEDs are described in this table.
LED Status Information
Description
LED
State
TQ6702 GEN2 & TQm6702 GEN2
Green
The access point is powered on and operating normally.
Blinking Green
The access point is booting up.
Red
The access point has encountered a
PWR/
fault condition.
SYS
Blinking Red
The access point is updating its
firmware.
OFF
The access point is not receiving power.
Green
The port has established a valid link to a network device.
Blinking Green
The port is transmitting or receiving data.
LAN 1
and
Amber
The port is connected to a PoE+ power sourcing
LAN 2
equipment.
OFF
The port has not established a link to a network device.
Green
The 2.4GHz radio is enabled.
2.4GHz
OFF
The 2.4GHz radio is disabled.
Solid Green
The 5GHz radio is enabled.
5GHz
OFF
The 5GHz radio is disabled.
Product Specifications
The product specifications are listed in the following tables.
Parameter
Dimensions (W x D x H)
Weight without mounting bracket
Weight with mounting bracket
Parameter
Operating Temperature
Storage Temperature
Operating Humidity
TQ6702 GEN2-R
Storage Humidity
Maximum Operating Altitude
N/A
The access point
is booting up.
Power Specifications on LAN Ports
N/A
Parameter
Maximum Power Consumption
Rated Voltage
Rated Current
External AC/DC Power Adapter Specifications
Parameter
Input Voltage Range
Input Frequency
Rated Output Voltage
Rated Output Current
Temperature Ranges
Maximum Operating Altitude
10
Physical Specifications
Specification
200 mm X 240 mm X 45 mm
(7.9 in. x 9.4 in. x 1.8 in.)
1.2 kg (2.6 lbs)
1.4 kg (3.1 lbs)
Environmental Specifications
Specification
0° C to 50° C (32° F to 122° F)
- 25° C to 70° C (- 13° F to 158° F)
0 % to 90% non-condensing
0 % to 95% non-condensing
3000 m (9843 ft)
Specification
25.5 watts
DC 48 A
0.67 A
Specification
100~240 VAC
50 - 60 Hz
+12 VDC
4 A
0° C to 50° C (32° F to 122° F)
3000 m (9843 ft)
Safety and Electromagnetic Emissions Certificates
This device complies with Part 15 of FCC Rules, Directive 2014/53/EU issued by the
Commission of the European Community, some other safety, electromagnetic emission,
and radio certificates.
The operating frequencies and maximum transmission power levels for wireless devices
operated in the EU & UK are listed below:
Model: AT-TQ6702 GEN2; AT-TQ6702 GEN2-R; AT-TQm6702 GEN2
2412-2472
5150-5250
MHz
Beamforming
19.87 dBm
22.87 dBm
Non-Beamforming 19.94 dBm
22.99 dBm
* This equipment should be installed and operated with a minimum distance of 22 cm
between the radiator and your body.
Note
Contact Allied Telesis for the EU conformity statement. To contact Allied Telesis,
visit the web site at www.alliedtelesis.com/contact.
เครื � อ งวิ ท ยุ ค มนาคมนี � ม ี ร ะดั บ การแผ่ ค ลื � น แม่ เ หล็ ก ไฟฟ้ าสอดคล ้ อ งตามมาตรฐาน
ความปลอดภั ย ต่ อ สุ ข ภาพของมนุ ษ ย ์จากการใช ้เครื � อ งวิ ท ยุ ค มนาคมที � ค ณะกรรมการกิ จ การโทรคม
นาคมแห่ ง ชาติ ป ระกาศกํ า หนด
Copyright 2023 Allied Telesis, Inc. All rights reserved.
No part of this publication may be reproduced without prior written permission from Allied
Telesis, Inc.
Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated.
All other product names, company names, logos or other designations mentioned herein
are trademarks or registered trademarks of their respective owners.
Allied Telesis, Inc. reserves the right to make changes in specifications and other
information contained in this document without prior written notice. The information
provided herein is subject to change without notice. In no event shall Allied Telesis, Inc.
be liable for any incidental, special, indirect, or consequential damages whatsoever,
including but not limited to lost profits, arising out of or related to this manual or the
information contained herein, even if Allied Telesis, Inc. has been advised of, known, or
should have known, the possibility of such damages.
11
5250-5350
5470-5725
MHz
MHz
MHz
22.99 dBm
29.97 dBm
22.96 dBm
29.83 dBm
12
Advertisement
