Setting Time In Standby Mode; Automatic Power Off Function; Selecting Modes; Adjust The Speaker Level Settings And Effects - JVC TH-W513BK Instruction Manual

• If a TV or an external device is connected to AUX / LINE IN socket, the main unit will switch on
automatically when the TV or the external device is switched on.
BUT in the following case, the unit will not switch on automatically in AUX / LINE IN mode:
− after automatic power off function is activated. For details, please refer to the section "Automatic
Power Off Function" below.

Setting Time in Standby mode

In STANDBY mode, the display will show "--:--", and then "PRESS AND HOLD PAIR
BUTTON". Press and hold
1. Press VOL+/VOL– Button on the unit or remote control to set the hours, then press
PAIR on the unit or
2. Press VOL+/VOL– Button on the unit or remote control to set the minutes, then
PAIR on the unit or
3. The time is now set. When you switch the unit to STANDBY mode, the unit will show
STANDBY and then the time clock.

Automatic Power Off Function

The unit automatically turns to STANDBY mode after 15 minutes if the TV or the external
unit is disconnected or switched off in OPTICAL or COAXIAL mode or the volume is too
close to mute in AUX, LINE IN or BT mode.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.

Selecting Modes

Press SOURCE repeatedly on the main unit or remote control to switch between BT,
Optical, Coaxial, AUX and LINE IN mode.

Adjust the Speaker Level Settings and Effects

Adjusting Volume
Press VOL + / – on the unit or remote control to adjust the volume.
•
If you wish to turn the sound off, press MUTE. The display will show "MUTE". Press
•
MUTE again, or press VOL + / – to resume normal listening.
Selecting Equaliser (EQ) Effect
Press MOVIE / SPORT / TV / DFLT button on the remote control to select the preset
equalisers.
• While the unit is in COAXIAL or OPITCAL mode, it will automatically switch into MOVIE EQ effect.
• While the unit is in BT, AUX or LINE IN mode, it will automatically switch into DFLT EQ effect.
/ PAIR on the unit or
on the remote control to confirm.
on the remote control to confirm.
on the remote control to set the time.
GB
/
/
15