Setting And Adjusting Surround Mode; Selecting The Surround Mode - JVC NX-DV3 Instructions Manual

Setting and Adjusting Surround Mode

About Surround Mode
■Multi-channels Surround Mode
When a multi-chan-
nel signal is input
with "AUTO SUR-
ROUND" setting,
this unit automati-
cally determines the
correct format and turns the surround mode "ON".
When a 2ch signal is input, the unit automatically
turns off the surround mode.
39

Selecting the Surround Mode

1
Press repeatedly to select
the surround mode.
Each time you press
toggles as follows.
■When the speaker position is "F1" or "F2"
( page 8-10)
Normally this mode should be
turned on.
Select this mode when watching
movies or using sound sources
recorded with multi-sounds.
This mode produces broader sound
compared with the multi-channel
mode. Select this mode when using
the sound source recorded with 2ch
such as sound source or CD.
This mode produces even broader
sound.
Turns off the surround effect.
■When the speaker position is "R" (
9,10), and stereo sound source is used
■When the speaker position is "R" (
9,10), and multi-sound source is used
(When the SURROUND mode is ON, the sound
format name is displayed.)
• DVD AUDIO :
• DVD VIDEO :
NOTE
• When the surround mode is "ON", and the signal
has been surround-processed, the display window
shows "SURROUND".
• During recording, the surround mode is tempo-
rarily deselected.
• The surround sound cannot be produced when
listening to headphones.
Introduction
, the display
page
Normally this mode should
be turned on.
See the description on the
lower left of page 40.
Turn off the surround effect.
page