JVC TH-D337H Quick Start Manual

Quick Start Guide
2.1 Soundbar with
Wired Subwoofer
TH-D337H
Thank you
for purchasing your new product.
We recommend that you spend some time reading this Quick Start
Guide in order that you fully understand how to connect your
Soundbar to your TV.
Use your Soundbar instruction manual and TV instruction manual to
choose the best way to connect your Soundbar and TV together.
•
Unpacking
Remove all items from the packaging. Retain the packaging. If
you dispose of it please do so according to local regulations.
To get the most from this product, you may need to buy an
Optical cable.
Main Unit 3.5 mm to 3.5 mm
Stereo Audio Cable
Remote Control
(battery included) Screw / Dowel x 4
Subwoofer Wall Bracket x 2
Mains Cable Instruction Manual
Quick Start Guide
•
Soundbar Sockets Overview
8
1 2 3 4 5 6 7
1. SUBWOOFER OUT 5. AUX 1 (L/R) Socket
2. AC~Power Plug
6. AUX 2 (BD/DVD) Socket
3. OPTICAL Socket
7. HDMI ARC (TV) Socket
4. SERVICE ONLY Socket
8. Wall Bracket Screws
•
Operating Your Remote Control
First-time Use of Remote Control
The unit has a pre-installed
lithium CR2025 battery.
Remove the protective tab to
activate the remote control
battery.
Battery Replacement for the Remote Control
1. Gently push the tab of the
battery tray in and slide it
free from the remote control.
2. Replace with a new CR2025
battery.
3. Slide the tray back into the
remote control. There will be
a click once it is back in place.
8
Install the battery correctly in the battery compartment. Normally the
battery's positive polarity (+) will face up.
•
Connection
This section involves various methods of connecting the product to other external components. Ensure all audio connections of the unit are connected before
connecting to the mains power socket.
GB
Method 1: Optical Connection
Use an optical cable (not included) to connect the soundbar's OPTICAL socket to the OPTICAL OUT socket of the external device. The
simplest option is to connect your soundbar directly to your TV. If you connect the soundbar to another external device (e.g. Blu-Ray player),
you will hear the sound from that device through the soundbar.
1. After connection, press button on the unit or remote control to switch the unit on.
2. Press SOURCE on the unit or OPTICAL on the remote control to select OPTICAL to play audio from your input device.
The unit may not be able to decode all digital audio formats from the input source. In this case, the unit will mute. This is NOT a defect. Ensure that the audio setting of
the input source (e.g. TV, game console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with Optical
input.
Method 2: HDMI Hub Connection
• Ensure HDMI cables that can support the ARC function are used.
• HDMI-CEC will be called different names by different manufacturers –
please refer to your owner's manual for details on setting up HDMI-CEC and
ARC.
• While using a HDMI cable for ARC function, CEC (Consumer Electronics
Control) provides interoperability between the unit and various devices (e.g.
TV). However, this unit is not guaranteed to fully operate with all HDMI-CEC
enabled devices. This is NOT a defect.
Using Your TV as a hub
The ARC (Audio Return Channel) function allows sound to travel to
and from your ARC-compliant TV to your soundbar through a single
HDMI connection. To enjoy the ARC function, please ensure that your
TV is both HDMI-CEC and ARC compliant and set up accordingly.
When correctly set up, the CEC feature allows you to adjust the volume
output (VOL +/– and MUTE) of the soundbar with the TV remote
control. When you switch your TV on/off with your remote control, your
soundbar will also be switched on/off. Be patient that it might take a
few seconds for your TV to tell your soundbar to switch on or off.
Use this method to connect all your devices into your TV.
1. Connect an HDMI cable (not included) from your soundbar's HDMI
ARC (TV) socket to the HDMI (ARC) socket on your ARC-compliant
TV.
2. After connection, press button on the unit or remote control to
switch the unit on.
3. Press SOURCE on the unit or HDMI ARC on the remote control to
select HDMI ARC mode to play audio from your input device.
Rear View of the Soundbar
2
1
Optical cable (not included)
TV
Set-top Box
Blu-ray Player / DVD Player Satellite Game Video
/ Recorder Receiver Console Camera
HDMI cable (not included)
TV
Set-top Box Blu-ray Player / DVD Satellite
Player / Recorder Receiver
The unit may not be able to decode all digital audio formats from the input
source. In this case, the unit will mute. This is NOT a defect. Ensure that the
audio setting of the input source (e.g. TV, game console, DVD player, etc.) is
set to PCM (Refer to the user manual of the input source device for its audio
setting details) with HDMI input.
Rear View of the Soundbar
Game Video
Console Camera