Presetting Automatic Dvd; Sound Increase Level; Changing The Display Brightness; Setting The Eco (Ecology) Mode - JVC CA-NXG7 Instructions Manual

Presetting Automatic DVD Sound
Increase Level
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level
for the currently loaded DVD, so you do not have to
adjust the volume when you change the source.
• This only functions for DVD Video and DVD-VR.
While "DVD/CD" is selected as the source...
DVD LEVEL1 DVD LEVEL2
As the number increases, the DVD sound level is
increased.

Changing the Display Brightness

You can dim the display.
While the System is turned on...
(while holding...)
DIMMER 1 Dims the display and turns off the
blue illumination on the main unit.
DIMMER 2 Dims the display more than
DIMMER 1 and turns off the blue
illumination on the main unit.
AUTO Dims the display automatically to
the same level as DIMMER 2 when
DIMMER
moving pictures or still pictures are
being played back.
DIMMER OFF Normal brightness.
19
text_EN_NXG7G3.indb 19 text_EN_NXG7G3.indb 19
DVD LEVEL3
DIMMER 1
DIMMER 2
AUTO DIMMER
DIMMER OFF

Setting the ECO (Ecology) Mode

Setting the ECO mode allows you to reduce power
consumption by turning the display off while on
standby.
While the System is on standby...
On the remote:
(while holding...)
On the main unit:
ECO ON
ECO OFF

Changing the Picture Tone

While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your
own preference.
To select a preset picture tone
1
While playing, display VFP setting screen.
On the TV
2
Select a preset picture tone.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and
can store the settings. (See the
next page.)
To clear the screen, press VFP again.
ECO ON
ECO OFF
08.6.25 2:22:12 PM 08.6.25 2:22:12 PM