Review The Network Deployment - Cisco Firepower 1010 Getting Started Manual

Review the Network Deployment

Review the Network Deployment
6.7 and Later Deployment
You can manage the FTD using FMC from either a data interface or from the Management 1/1 interface. The
dedicated Management interface is a special interface with its own network settings. When you enable FMC
access from a data interface, the FTD forwards management traffic over the backplane so it can be routed
through the data interface.
This guide shows you how to manage the FTD using the inside interface or the outside interface, which you
can configure during initial setup at the console port. You can configure other data interfaces after you connect
the FTD to the FMC. Note that Ethernet1/2 through 1/8 are enabled as switch ports by default.
Cisco Firepower 1010 Getting Started Guide
92
Firepower Log Into the Firepower Management Center, on page
Management Center
Cisco Commerce Obtain Licenses for the Firepower Management Center, on page
Workspace licenses.
Smart Software Obtain Licenses for the Firepower Management Center, on page
Manager a license token for the FMC.
Firepower Obtain Licenses for the Firepower Management Center, on page
Management Center the FMC with the Smart Licensing server.
Firepower Register the FTD with the FMC, on page 110
Management Center
Firepower Configure a Basic Security Policy, on page 112
Management Center
Firepower Threat Defense Deployment with FMC
108.
108: Buy feature
108: Generate
108: Register