Cisco Firepower 1010 Getting Started Manual page 12

Branch Office - Receive the Device
Branch Office - Receive the Device
After you receive the FTD from your corporate IT department, you need to record the device's serial number
and send it to the CDO administrator. Outline a communication plan for the onboarding process. Include any
key tasks to be completed and provide points of contact for each item.
Tip You can
low-touch provisioning.
Verify the Device Supports Low-Touch Provisioning from a Branch Office
Before you rack the device or discard the shipping box, verify that your Firepower device can be deployabled
using low-touch provisioning.
Note This procedure assumes you are working with a new Firepower device running FTD Version 6.7 or later.
Cisco Firepower 1010 Getting Started Guide
10
Cisco Defense Onboard the Device Using Low-Touch Provisioning and the Serial Number,
Orchestrator on page
(CDO Admin)
Branch Office Tasks Cable the Device, on page
(Branch Office
Employee)
Branch Office Tasks Power On the Device, on page
connect it to an electrical outlet.
(Branch Office
Employee)
Cisco Cloud Power On the Device, on page
connection to the Cisco cloud.
Cisco Defense Manage the Device with CDO, on page
Orchestrator
(CDO Admin)
Smart Software Configure Licensing, on page
Manager Licensing Server; or continue to use the 90-day evaluation license.
(CDO Admin)
Cisco Commerce Configure Licensing, on page
Workspace
(CDO Admin)
watch this video to see how a Branch employee onboards a Firepower device using CDO and
15.
17.
18: Attach the power cord to the device, and
18: Observe the Status LED on the device for
19: Optionally, register the device with the Smart
19: Optionally, generate a license token.
Firepower Threat Defense Deployment with CDO
24.