Cisco Firepower 1010 Getting Started Manual page 18

Onboard the Device Using Low-Touch Provisioning and the Serial Number
Note
Step 3 On the Onboard FTD Device screen, click Use Serial Number.
Step 4
In the Connection area, provide the following:
a) Select the Secure Device Connector (SDC) that this device will communicate with.
The default SDC is displayed, but you can change it by clicking the blue Change link.
b) Device Serial Number: Enter the serial number or the PCA number of the device you want to onboard.
c) Device Name: Provide a name for the device.
Step 5 Click Next.
Step 6
In the Password Reset area, provide the following:
a) Default Password Not Changed: Select this option to change the default password of a new device.
• Enter a New Password for the device and Confirm Password.
• Ensure that the new password meets the requirements mentioned onscreen.
Note
b) Default Password Changed: Select this option only for the device whose default password has already
been changed using FDM or on Firepower eXtensible Operating System (FXOS) Console.
Step 7 Click Next.
Step 8
In the Smart License area, select one of the required options.
• Apply Smart License: Select this option if your device is not smart licensed already. You have to generate
a token using the Cisco Smart Software Manager and copy in this field.
• Device Already Licensed: Select this option if your device has already been licensed.
Note
• Use 90-day Evaluation License: Apply a 90-day evaluation license.
Step 9 Click Next.
Step 10
In the Subscription Licenses area, perform the following:
• If the smart license is applied, you can enable the additional licenses you want and click Next.
• If the evaluation license is enabled, all other licenses are available except for the RA VPN license. Select
the licenses that you want and click Next to continue.
• You can choose to continue only with the base license.
Note
Step 11 (Optional) In the Labels area, you can enter a label name if required.
Step 12
Click Go to Devices and Services.
Cisco Firepower 1010 Getting Started Guide
16
When you attempt to onboard an FTD device, CDO prompts you to read and accept the Firepower
Threat Defense End User License Agreement (EULA), which is a one-time activity in your tenant.
Once you accept this agreement, CDO doesn't prompt it again in subsequent FTD onboarding. If
the EULA agreement changes in the future, you must accept it again when prompted.
If the device's default password is already changed, the entries made in this field will be ignored.
If the default password has already been changed, this radio button will be selected
automatically. However, you can choose another option that you want.
If the Device Already Licensed is selected in the Smart License step, you cannot perform any
selection here. CDO displays Keep Existing Subscription and moves to the Labels step.
Firepower Threat Defense Deployment with CDO