Cable The Device (6.7 And Later) - Cisco Firepower 1010 Getting Started Manual

Firepower Threat Defense Deployment with FMC

Cable the Device (6.7 and Later)

Figure 36: Suggested Network Deployment
Cable the Device (6.7 and Later)
To cable one of the recommended scenarios on the Firepower 1010, see the following steps.
Note
Other topologies can be used, and your deployment will vary depending on your requirements. For example,
you can convert the switch ports to firewall interfaces.
Procedure
Step 1
Cable for FMC access on the inside network.
Cisco Firepower 1010 Getting Started Guide
97