About This Guide - Keysight M8199B Getting Started Manual

About This Guide

6
This guide provides high-level information for an initial setup of the Keysight M8100A
Series Arbitrary Waveform Generators. This guide focuses on setting up "bundled"
systems such as the M8100A-BU5 and M8100A-BU6.
The M8100A-BU5 system has the M8100A module(s) and pre-configured system
consisting of one M9505A 5-slot AXIe Chassis with USB option.
The M8100A-BU6 system has the M8100A module(s) and pre-configured system (pre
installed M9537A with M8070B and M8199A module driver) consisting of one M9505A
5-slot AXIe chassis with USB option and one M9537A AXIe Embedded PC Controller.
If you ordered a system that requires on-site installation of individual M8100A modules or
the M9537A AXIe Embedded Host Computer into the M9505A AXIe Chassis, refer to the
Keysight M8000 Series of BER Test Solutions Installation Guide for detailed module-level
installation instructions.
For information on M8199A remote programming, refer to the M8000 Series
Programming Guide.
M8100A Series Arbitrary Waveform Generators Getting Started Guide