Keysight M8199B Getting Started Manual page 39

M8100A Series Arbitrary Waveform Generators Getting Started Guide
Case 4 Connecting M8008A clock module to four M8199A AWG modules
In this case, a M8008A clock module, four M8199A AWG modules, two
M9505A AXIe chassis and the following cables are required:
• 3.5 mm, 50 cm M8199A-811 customer orderable sync cable
(M8199-61620)
• 1.85 mm, 45 cm M8199A-810 replacement channel clock cable
(M8199-61624)
Make the connections as described below:
1 Connect the M8008A Clock Generator Sync Out port with all the four
M8199A AWG Sync In ports using sync cable (blue cable).
2 Connect the M8008A Clock Generator Sample Clock Out port with all
the four M8199A AWG Clock In ports using clock cable (red cable).
Basic Setup for M8100A 2
39