Target Counting - KERN CKE 6K0.02 Operating Instructions Manual

9.3 Target counting

The <Target counting> application variant allows weighing of goods within set
tolerance limits in keeping with a determined target quantity.
Reaching the target quantity is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance marks).
Optic signal:
The tolerance marks provide the following information:
Target quantity exceeds defined tolerance
Target quantity within defined tolerance
Target quantity below defined tolerance
Acoustic signal:
The acoustic signal depends on the menu setting
< setup  beeper >, see chap.10.3.1.
TCKE-A/-B-BA-def-2333 31