Opening Image Files - Sanyo DSR-5016PA Instruction Manual

3 DVR Viewer2 Operation Guide

Opening Image Files

The image files are not displayed when the Viewer Software is run. Specify and open the playback file through the procedure
below.
1
Click in the toolbar.
Or, click "Open" in the file menu.
The [Open] dialog is displayed.
2
Click .
The [Browse for Folder] dialog is displayed.
3
Specify the folder in which the images
are saved and click [OK].
The folder specified in the [Open] dialog is displayed.
English
4
Verify the displayed folder and click
[OK].
The image file loads.
5
Screen display
The first image of the loaded file is initially displayed on full
screen.
Refer to the appropriate pages for details about the
operations of the Viewer Screen.
Switching the display pattern (1/4/9/16 screen) of the
playback images (Refer to P14)
Selecting the channels displayed on each screen (Refer
to P14)
Operating panel functions (Refer to P15)
13
01 09/29/2005 16:28:24