Switching The Power On / Off; A Switching The Power On; B Switching The Power Off - Sanyo DSR-2016 Instruction Manual

Switching the power on / off

2 1
A
Switching the power on
1
Connect the power cable to the outlet.
Turn on the electricity, the power indicator lights in
orange (standby).
2
Press the power button.
The power indicator changes to green (running) and
initialization starts.
During initialization the message "INITIALIZING..." and
the firmware version are displayed on a "SANYO" logo
screen.
Once the initialization is complete, live videos are
displayed on multi-16 screen.
INTIALIZING...
Ver: SNXXXX.XX.XXXX(YYYYMMDD)
:A
C NO VIDEO
CH1 CH2
NO VIDEO NO VIDEO
CH5 CH6
NO VIDEO NO VIDEO
CH9 CH10
NO VIDEO NO VIDEO
CH13 CH14
Do not press the power button during initialization. This
may result in data loss.
7
2% 2007/05/03 09:04:54
NO VIDEO NO VIDEO
CH3 CH4
NO VIDEO NO VIDEO
CH7 CH8
NO VIDEO NO VIDEO
CH11 CH12
NO VIDEO NO VIDEO
CH15 CH16
2
B
Switching the power off
1
Press the power button.
The password entering screen is displayed.
2
Enter the ADMIN PASSWORD using the channel
selection buttons.
The factory default password is "1111".
For security reasons, make sure you change the default
ADMIN PASSWORD. (P38)
~
1 10
3
Press the ENTER button.
The SHUTDOWN confirmation screen is displayed.
4
Select "CONFIRM" with the control button (}~).
5
Press the ENTER button.
The power shuts down and the power indicator turns
orange.
4
3 5
•
2% 2007/05/03 09:04:54
:A
PASSWORD
* * * *
- - - -
CH1
SHUTDOWN
CANCEL CONFIRM