Part Names Of The Remote Control - Sanyo DSR-2016 Instruction Manual

Part names of the remote control

Batteries for the remote control are not supplied. Use two AAA batteries.
REC/STOP
1
1
3
4
7
4
ID
5
6
9
MENU
F
H
I
PTZ
L
SEQ
1 REC/STOP button
Stops and starts recording of live videos displayed on the
monitor.
2 ALARM button
Switches ALARM OUT to ENABLE/DISABLE.
3 Numeric buttons
Used to input passwords, camera number and ID number.
4 ID button
If a remote control ID number was set, press before
inputting it. (P41)
5
• SKIP button
During settings: Moves the cursor upward.
During playback: Skips the video 1 minute forward.
6 • f button
During settings: Moves the cursor to the left.
During playback: Fast rewinds.
7 • e button
During settings: Moves the cursor to the right.
During playback: Fast forwards.
8 REPLAY •
button
During settings: Moves the cursor downward.
During playback: Skips the video 1 minute backward.
9 ENTER • c/h button
During settings: Confirms the selected item.
During search: Plays back the selected video.
During playback: Displays a still video.
65
ALARM
2
2 3
5 6
8 9
0
10
7
8
EXIT
G
SERCH
J
MARK
K
LOCK COPY
M
N
QUAD MULTI
b Inserting batteries in the remote control.
1 Take the battery cover off.
2 Place the batteries and fit the cover.
Note: Make sure the batteries are correctly oriented.
b Operation range
Max. 5 m
30° 30°
F MENU button
Displays the setting menu screen.
G EXIT button (b)
To exit the settings mode and the menu screen.
H SEARCH button
Activates the recorded videos search mode.
I PTZ button
Activates the operation mode that operates the Pan/Tilt/
Zoom/Focus of the dome camera connected to the
RS-485 control terminal.
J LOCK button
Switches security lock to ON/OFF.
K MARK • COPY button
Activates the video saving mode.
L SEQ button
Sequences the videos of the connected cameras.
M QUAD button
Displays the quad-screen.
Each time the button is clicked the video of the next four
channels is displayed in order of the channel numbers.
N MULTI button
Displays a multi-screen.
Each time the button is clicked the display switches in turn
from the multi-16 screen to the multi-9 screen (2 patterns).