Main Screen Structure And Function Of Each Part - Sanyo DSR-2016 Instruction Manual

Main screen structure and function of each part

When connected to this unit, the live video of the camera is displayed on the main screen.
3
1
Video display area
Displays live video or playback video.
<Screen display method>
Can be switched using the operation button on the screen.
(P54)
• Single-screen
• Multi-screen (multi-9 screen / multi-16 screen)
• Sequence (camera switch) display
• Full-screen display
<Camera information>
The following camera information is displayed on each
camera video.
1 (Top left):
• Camera channel (CH1 - 16)
• Camera designation
Set in the camera designation settings (site) screen
in the set up menu. (P62)
(When no camera is connected to the channel, the
message "No Camera" is displayed.)
2 (Top right):
M: MOTION recording in progress (P17)
A: ALARM recording in progress (P18)
3 (Bottom right):
R: Recording, such as real time recording, in progress.
(P16)
4 (Bottom left):
A: Alarm output in progress (P53)
1
1 2
4 3
• Quad-screen
2
4 (The example shown is a multi-16 screen display.)
2
Information display area
The following information is displayed.
1
Shows the used capacity of the hard disk of this unit
2
Communication bit rate and frame rate
To display, set in the set up menu in the general setting
screen. (P61)
3
Date and time information
For live video: Current date and time
For playback video: Recorded date and time
3
Operation panel (P53)
The view operation buttons are arranged on the panel.
4
Log window
The operation history is displayed as a list.
Displayed items: Type, Site, Event, Date/Time
Memo: Click [SEARCH] on the operation panel to switch the
screen to search mode. One part of the operation
panel display and one part of the log window display
change. (P58)
3
2
1
52