C Setting The Language (Language); Setting The Rs-485 Termination Switch (Sanyo Ssp Side) - Sanyo DSR-2016 Instruction Manual

Pre-operation preparation
9
Select "CONFIRM" using the control button (}~)
and press the ENTER button.
The unit automatically restarts, the initializing screen is
displayed.
Once the initialization is complete and the live screen is
displayed, the displayed date and time are updated.
INTIALIZING...
Ver: XXXXXX.XX.XXXX(YYYYMMDD)
:A
C NO VIDEO
CH1 CH2
NO VIDEO NO VIDEO
CH5 CH6
NO VIDEO NO VIDEO
CH9 CH10
NO VIDEO NO VIDEO
CH13 CH14
b Correcting the set time
When a new time earlier than the previous recording time is
set, the recording data that will be erased, showed in range
A
, is displayed on the clock update confirmation screen.
Confirm the time before selecting "CONFIRM" as any video
data recorded after the set time will be erased.
CLOCK SET
CANCEL
Caution: If you update to new T/D,
recorded data between new and rec-end T/D
will be deleted.
New T/D 2007/ 5/11 13:43:39
A
Rec-end T/D 2007/ 5/11 13:53:45
Previous recorded time
11
2% 2007/05/03 09:04:54
NO VIDEO NO VIDEO
CH3 CH4
NO VIDEO NO VIDEO
CH7 CH8
NO VIDEO NO VIDEO
CH11 CH12
NO VIDEO NO VIDEO
CH15 CH16
CONFIRM
Set time
C
Setting the language (LANGUAGE)
1
Follow steps 1 to 3 of the CLOCK SET procedure.
2
Select "LANGUAGE" using the control button ({|)
and select the display language using the control
button (}~).
Once a language has been selected the display
language changes.
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
USER PASSWORD
NETWORK PASSWORD
DATE FORMAT
CLOCK SET
RS485 SET
PTZ CONTROL
LANGUAGE
REMOTE CONTROL ID
Language selection:
ENGLISH, 日本語 , DEUTSCH, Francais, ESPANOL,
ITALIANO, ipllXTV ìRàX, 中文 （繁體） , POLSKI,
CESKY, óçhHBjlXV LRTX, Româna, Srpski, SVENSKA,
ภาษาไทย
Setting the RS-485 termination switch (SANYO
D
SSP side)
If multiple devices are connected terminator settings are
necessary at both ends.
• When multiple devices are connected,
make the termination switch "ON" on the first and last
device you connected.
• When multiple devices are connected,
make the termination switch "OFF" except the first and last
devices that you connected.
If the termination switch is not set, the correct data will
not be delivered to each unit.
System controller
Digital video recorder
SYSTEM
DVR
YYYY/MM/DD
ENGLISH
00
SW
Termination switch
ON
1 2 3 4
ON
RS485 Termination
switch (TERM) OFF
RS485 Termination
switch (TERM) ON